Displacements (in addition to already identified misalignments from the project requirements):
- +/- 400 mm along X
- +/- 400 mm along Y
Rotations (in addition to already identified misalignments from the project requirements):
- +/- 2.0o around X
- +/- 2.0o around Y
Axis convention:

Considered combinations:
- + 2.0o around X associated to -400 mm along Y
- - 2.0o around X associated to +400 mm along Y
- + 2.0o around Y associated to +400 mm along X
- - 2.0o around Y associated to -400 mm along X
Sensitivity performed on the worst case only:
- 400mm replaced by 300mm
- 2.0o replaced by 1.5o